Clamping using PN junction diode
================================
A DC can be added to an AC signal using a diode.

**Objective**

Demostrate clamping of an AC signal at different levels, using a PN junction diode

**Procedure**

.. image:: schematics/clamping.svg
	   :width: 300px

-  Make connections as shown in the figure. 
-  Set WG to 1000 Hz
-  Load resistor may be omitted, if it distorts the output
-  Change PV1 and note the difference in the output

.. image:: pics/clamping-screen.png
	   :width: 300px

**Discussion**

The clamping level is decided by the applied DC voltage and the diode
drop.
