Generating sound
================
Electrical signals can be converted into sound using devices like loudspeaker,
Piezo buzzer etc. We use a buzzer because available loudspeakers have a low impedance
and require more current.
 
**Objective**

Generate sound from electrical signals, using a Piezo-electric buzzer.


**Procedure**

.. image:: schematics/sound-generator.svg
	   :width: 300px

-  Enable A1, and its analysis
-  Set WG to 1000Hz, change it using the Slider provided and listen to the sound.

**Discussion**

When you change the frequency of the voltage that excites the Piezo,
both the frequency and the intesity of the sound changes. The intensity
is maximum near 3500 Hz, due to resonance. The resonant frequency of the
Piezo buzzer is decided by its size and the mechanical properties.
