| ▼ include | |
| abuf.h | Array buffer (string builder) |
| am_analyze.h | AM signal analyzer |
| baseband.h | Various functions for baseband sample processing |
| bitbuffer.h | A two-dimensional bit buffer consisting of bytes |
| compat_paths.h | Compat_paths addresses compatibility with default OS path names |
| compat_time.h | Compat_time addresses compatibility time functions |
| confparse.h | Light-weight (i.e |
| data.h | A general structure for extracting hierarchical data from the devices; typically key-value pairs, but allows for more rich data as well |
| decoder.h | Meta include for all decoders |
| decoder_util.h | High-level utility functions for decoders |
| fileformat.h | Various utility functions handling file formats |
| list.h | Generic list |
| mongoose.h | |
| optparse.h | Option parsing functions to complement getopt |
| output_mqtt.h | MQTT output for rtl_433 events |
| pulse_demod.h | Pulse demodulation functions |
| pulse_detect.h | Pulse detection functions |
| r_api.h | Generic RF data receiver and decoder for ISM band devices using RTL-SDR and SoapySDR |
| r_device.h | Definition of r_device struct |
| r_private.h | Definition of r_private state structure |
| r_util.h | Various utility functions for use by applications |
| rtl_433.h | Definition of r_cfg application structure |
| rtl_433_devices.h | Declaration of all available decoders |
| samp_grab.h | IQ sample grabber (ring buffer and dumper) |
| sdr.h | SDR input from RTLSDR or SoapySDR |
| term_ctl.h | Terminal control utility functions |
| util.h | Various utility functions for use by device drivers |
| ▼ src | |
| ► devices | |
| acurite.c | Acurite weather stations and temperature / humidity sensors |
| akhan_100F14.c | |
| alecto.c | |
| ambient_weather.c | |
| ambientweather_tx8300.c | Ambient Weather TX-8300 (also sold as TFA 30.3211.02) |
| ambientweather_wh31e.c | Ambient Weather WH31E protocol |
| blyss.c | |
| brennenstuhl_rcs_2044.c | |
| bresser_3ch.c | |
| bresser_5in1.c | |
| bt_rain.c | |
| calibeur.c | |
| cardin.c | |
| chuango.c | |
| companion_wtr001.c | Companion WTR001 Temperature Sensor decoder |
| current_cost.c | CurrentCost TX, CurrentCost EnviR current sensors |
| danfoss.c | |
| digitech_xc0324.c | Decoder for Digitech XC-0324 temperature sensor |
| directv.c | DirecTV RC66RX Remote Control decoder |
| dish_remote_6_3.c | |
| dsc.c | |
| ecowitt.c | Ecowitt Wireless Outdoor Thermometer WH53/WH0280/WH0281A |
| efergy_e2_classic.c | Efergy e2 classic (electricity meter) |
| efergy_optical.c | Efergy IR Optical energy consumption meter |
| elro_db286a.c | |
| elv.c | |
| emontx.c | OpenEnergyMonitor.org emonTx sensor protocol |
| esa.c | |
| esic_emt7110.c | ESIC EMT7110 power meter (for EMR7370 receiver) |
| esperanza_ews.c | Esperanza EWS-103 sensor on 433.92Mhz |
| eurochron.c | |
| fineoffset.c | Fine Offset Electronics sensor protocol |
| fineoffset_wh1050.c | Fine Offset WH1050 Weather Station |
| fineoffset_wh1080.c | Fine Offset WH1080/WH3080 Weather Station |
| flex.c | |
| fordremote.c | |
| fs20.c | Simple FS20 remote decoder |
| ft004b.c | |
| ge_coloreffects.c | |
| generic_motion.c | |
| generic_remote.c | |
| generic_temperature_sensor.c | |
| gt_wt_02.c | GT-WT-02 sensor on 433.92MHz |
| hcs200.c | Microchip HCS200 KeeLoq Code Hopping Encoder based remotes |
| hideki.c | |
| holman_ws5029.c | Decoder for Holman Industries WS5029 weather station |
| hondaremote.c | |
| honeywell.c | |
| honeywell_wdb.c | Honeywell ActivLink, wireless door bell, PIR Motion sensor |
| ht680.c | |
| ibis_beacon.c | |
| ikea_sparsnas.c | |
| infactory.c | InFactory outdoor temperature and humidity sensor |
| inovalley-kw9015b.c | |
| interlogix.c | |
| intertechno.c | |
| kedsum.c | Kedsum temperature and humidity sensor (http://amzn.to/25IXeng) |
| kerui.c | |
| lacrosse.c | |
| lacrosse_TX141TH_Bv2.c | LaCrosse TX141-Bv2, TX141TH-Bv2, TX141-Bv3 sensor |
| lacrosse_tx35.c | LaCrosse/StarMétéo/Conrad TX35 protocol |
| lacrosse_ws7000.c | LaCrosse WS7000/WS2500 weather sensors |
| lacrossews.c | LaCrosse WS-2310 / WS-3600 433 Mhz Weather Station |
| lightwave_rf.c | |
| m_bus.c | |
| maverick_et73.c | |
| maverick_et73x.c | |
| mebus.c | |
| new_template.c | Template decoder for DEVICE, tested with BRAND, BRAND |
| newkaku.c | Kaku decoder |
| nexa.c | Nexa decoder |
| nexus.c | |
| oil_standard.c | Oil tank monitor using manchester encoded FSK/ASK protocol |
| oil_watchman.c | |
| opus_xt300.c | |
| oregon_scientific.c | Various Oregon Scientific protocols |
| oregon_scientific_sl109h.c | Oregon Scientific SL109H decoder |
| oregon_scientific_v1.c | |
| philips_aj3650.c | Philips AJ3650 outdoor temperature sensor |
| philips_aj7010.c | Philips outdoor temperature sensor |
| prologue.c | Prologue sensor protocol |
| proove.c | Proove decoder |
| quhwa.c | |
| radiohead_ask.c | |
| rftech.c | |
| rubicson.c | |
| rubicson_48659.c | Rubicson 48659 meat thermometer |
| s3318p.c | Conrad Electronics S3318P outdoor sensor |
| schraeder.c | Schrader TPMS protocol |
| silvercrest.c | |
| simplisafe.c | |
| smoke_gs558.c | |
| solight_te44.c | |
| springfield.c | |
| steelmate.c | |
| tfa_30_3196.c | TFA Dostmann 30.3196 T/H outdoor sensor |
| tfa_pool_thermometer.c | |
| tfa_twin_plus_30.3049.c | TFA-Twin-Plus-30.3049 also Conrad KW9010 (perhaps just rebranded), Ea2 BL999 |
| thermopro_tp11.c | |
| thermopro_tp12.c | |
| tpms_citroen.c | |
| tpms_ford.c | |
| tpms_jansite.c | Jansite FSK 7 byte Manchester encoded checksummed TPMS data |
| tpms_pmv107j.c | |
| tpms_renault.c | |
| tpms_toyota.c | |
| ts_ft002.c | TS-FT002 Tank Liquid Level decoder |
| ttx201.c | |
| vaillant_vrt340f.c | |
| waveman.c | |
| wg_pb12v1.c | WG-PB12V1 Temperature Sensor |
| wssensor.c | |
| wt0124.c | |
| wt450.c | WT450 wireless weather sensors protocol |
| x10_rf.c | |
| x10_sec.c | |
| ► getopt | |
| getopt.c | |
| getopt.h | |
| abuf.c | Array buffer (string builder) |
| am_analyze.c | AM signal analyzer |
| baseband.c | Various functions for baseband sample processing |
| bitbuffer.c | A two-dimensional bit buffer consisting of bytes |
| compat_paths.c | |
| compat_time.c | |
| confparse.c | Light-weight (i.e |
| data.c | |
| decoder_util.c | High-level utility functions for decoders |
| fileformat.c | Various utility functions handling file formats |
| list.c | Generic list |
| mongoose.c | |
| optparse.c | Option parsing functions to complement getopt |
| output_mqtt.c | MQTT output for rtl_433 events |
| pulse_demod.c | Pulse demodulation functions |
| pulse_detect.c | Pulse detection functions |
| r_api.c | Generic RF data receiver and decoder for ISM band devices using RTL-SDR and SoapySDR |
| r_util.c | Various utility functions for use by applications |
| rtl_433.c | Rtl_433, turns your Realtek RTL2832 based DVB dongle into a 433.92MHz generic data receiver |
| samp_grab.c | IQ sample grabber (ring buffer and dumper) |
| sdr.c | SDR input from RTLSDR or SoapySDR |
| term_ctl.c | Terminal control utility functions |
| util.c | Various utility functions for use by device drivers |
1.8.13